 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PCB Relay Miniature Relay for Signal Circuits I I I I I G5V-2 Wide switching power of 10 A to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements. Ag + Au clad bifurcated crossbar contacts and fully sealed for high contact reliability. New 150-mW relays with high-sensitivity. 4+ FCC Ordering Information Classification Standard High-sensitivity Contact form DPDT Contact type Bifurcated crossbar Contact material Ag + Au-clad Enclosure ratings Fully sealed G5V-2 G5V-2-H1 Model Note: When ordering, add the rated coil voltage to the model number. Example: G5V-2 12 VDC Rated coil voltage Model Number Legend G5V 1 2 3 VDC 2. Classification H1: High-sensitivity 3. Rated Coil Voltage 3, 5, 6, 9, 12, 24, 48 VDC 1. Contact Form 2: DPDT Specifications I Coil Ratings 3 VDC 166.7 mA 18 W Armature OFF Armature ON 0.04 0.05 5 VDC 100 mA 50 W 0.09 0.11 6 VDC 83.3 mA 72 W 0.16 0.19 9 VDC 55.6 mA 162 W 0.31 0.49 12 VDC 41.7 mA 288 W 0.47 0.74 24 VDC 20.8 mA 1,152 W 1.98 2.63 48 VDC 12 mA 4,000 W 7.23 10.00 Standard Models Rated voltage Rated current Coil resistance Coil inductance (H) (ref. value) Must operate voltage Must release voltage Max. voltage Power consumption 75% max. of rated voltage 5% min. of rated voltage 120% of rated voltage at 23C Approx. 500 mW Approx. 580 mW 1 G5V-2 High Sensitivity Models Rated voltage Rated current Coil resistance Coil inductance (H) (ref. value) Armature ON Armature OFF 3 VDC 50 mA 60 W 0.18 0.57 5 VDC 30 mA 166.7 W 0.46 0.71 6 VDC 25 mA 240 W 0.70 0.97 9 VDC 16.7 mA 540 W 1.67 2.33 12 VDC 12.5 mA 960 W 2.90 3.99 24 VDC 8.33 mA 2,880 W 6.72 9.27 G5V-2 48 VDC 6.25 mA 7,680 W 20.1 26.7 Must operate voltage Must release voltage Max. voltage 75% max. of rated voltage 5% min. of rated voltage 180% of rated voltage at 23C 150% of rated voltage at 23C Approx. 200 mW Approx. 300 mW Power consumption Note: I Approx. 150 mW 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. Contact Ratings Item Standard models Resistive load (cosf = 1) 0.5 A at 125 VAC; 2 A at 30 VDC Ag + Au-clad 2A 125 VAC, 125 VDC 2A 62.5 VA, 60 W 0.01 mA at 10 mVDC 1A 62.5 VA, 24 W 0.5 A at 125 VAC; 1 A at 24 VDC High sensitivity models Load Rated load Contact material Rated carry current Max. switching voltage Max. switching current Max. switching power Failure rate (reference value) Note I Note:P level: l60 = 0.1 x 10-6/operation Characteristics Item Standard models 50 mW max. 7 ms max. 3 ms max. Operate: approx. 0.3 ms Release: approx. 1.5 ms Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr (under rated load) 1,000 MW min. (at 500 VDC) 1,000 VAC, 50/60 Hz for 1 min between coil and contacts 1,000 VAC, 50/60 Hz for 1 min between contacts of different polarity 750 VAC, 50/60 Hz for 1 min between contacts of same polarity 1,000 VAC, 50/60 Hz for 1 min between coil and contacts 1,000 VAC, 50/60 Hz for 1 min between contacts of different polarity 500 VAC, 50/60 Hz for 1 min between contacts of same polarity High sensitivity models 100 mW max. Contact resistance Operate time Release time Bounce time Max. operating frequency Insulation resistance Dielectric strength Impulse withstand voltage Vibration resistance Shock resistance Endurance Ambient temperature Ambient humidity Weight 1,500 V (10 x 160 s) between coil and contacts (conforms to FCC Part 68) Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Destruction: 1,000 m/s2 (approx. 100G) Malfunction: 200 m/s2 (approx. 20G) Destruction: 1,000 m/s2 (approx. 100G) Malfunction: 100 m/s2 (approx. 10G) Mechanical: 15,000,000 operations min. (at 36,000 operations/hr) Electrical: 100,000 operations min. (at 1,800 operations/hr) Operating: -25C to 65C (with no icing) Operating: 5% to 85% Approx. 5 g Operating: -25C to 70C (with no icing) 2 G5V-2 I G5V-2 Approved Standards Contact form Coil ratings G5V-2 3 to 48 VDC 0.6 A, 125 VAC (general use) 0.6 A, 110 VDC (resistive load) 2 A, 30 VDC (resistive load) Contact ratings G5V-2-H1 0.5 A, 125 VAC (general use) 0.2 A, 110 VDC (resistive load) 1 A, 24 VDC (resistive load) UL478, UL1950, UL508 (File No. E41515)/CSA C22.2 No.0, No.14 (File No. LR24825) DPDT Engineering Data Maximum Switching Power G5V-2 Endurance G5V-2 Ambient Temperature vs. Maximum Coil Voltage G5V-2 30-VDC resistive load Maximum coil voltage (%) AC resistive load DC re sistive load Endurance (x10 3 operations) Switching current (A) Coil rated voltage 3 to 24 VDC 125-VAC resistive load 48 VDC 1 2 3 Switching voltage (V) Switching current (A) Ambient temperature () Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. G5V-2-H1 1000 G5V-2-H1 5 3 G5V-2-H1 200 24-VDC resistive load 3 to 24 VDC 180 160 140 120 100 80 0 48 VDC Life expectancy (x10 3 operations) AC resistive load 1 0.7 0.5 0.3 0.2 0.1 DC resistive load 300 100 50 30 125-VAC resistive load 10 0 Switching voltage (V) Switching current (A) Maximum coil voltage (%) 500 Switching current (A) Ambient temperature () Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. 3 G5V-2 G5V-2 Dimensions Note: 1. All units are in millimeters unless otherwise indicated. 2. Orientation marks are indicated as follows: Terminal Arrangement/ Internal Connections (Bottom View) 1 4 20.5 max. 20.3 typ. 10.1 max. 9.9 typ. 16 13 11 9 6 8 (1.3) Mounting Holes (Bottom View) Tolerance: 0.1 7.62 5.08 5.08 (1.2) 7.62 11.5 max. 11.4 typ. 0.5 (1.3) Eight, 1-dia. holes 0.5 0.3 7.62 3.5 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K046-E1-2B 4 |
Price & Availability of G5V-2-H1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |